D Quick Tuning Step; D Selecting "Khz" Step; Tuning Step Function - Icom IC-7800 Instruction Manual

3
BASIC OPERATIONS
D D Quick tuning step
Select mode
Quick tuning indicator
D D Selecting "kHz" step
D D
⁄

tuning step function

1
4
1
⁄ tuning step OFF
4
Main dial [TS] [TS]
Quick tuning indicator
1
⁄ tuning step ON
4
The operating frequency can be changed in kHz steps
(0.1, 1, 5, 9, 10, 12.5, 20 or 25 kHz selectable) for
quick tuning.
q Push [TS] to turn the quick tuning function ON.
• "Z" appears when the quick tuning function ON.
w Rotate the main dial to change the frequency in pro-
grammed kHz steps.
e Push [TS] again to turn OFF the indicator.
r Rotate the main dial for normal tuning if desired.
q Push [TS] to turn the quick tuning function ON and
OFF.
• "Z" appears when the quick tuning function ON.
w Push [TS] for 1 sec. to enter tuning step setting dis-
play.
• Selected tuning steps for all modes appear.
e Select the desired operating mode.
r Rotate the main dial to select the desired tuning step.
t Repeat steps e and r to select quick tuning steps
for other modes, if desired.
y Push [EXIT/SET] to exit the setting display.
NOTE: When entering quick tuning step set mode,
the quick tuning function must be activated first. The
main and sub bands have independent tuning step
settings.
When operating in SSB data, CW, RTTY or PSK, the
1
⁄ tuning function is available. Dial rotation is reduced
4
1
to ⁄ of normal speed when the
4
ON for finer tuning control.
➥ Push [1/4] to toggle the
OFF.
• " 1 " appears when the
⁄
4
3-6
1
⁄ tuning function is
4
1
⁄ tuning function ON and
4
1
⁄ tuning function is ON.
4