Break-In Function; D Semi Break-In Operation; D Full Break-In Operation - Icom IC-756PROIII Instruction Manual

6
FUNCTION FOR TRANSMIT

■ Break-in function

The break-in function is used in CW mode to automat-
ically toggle the transceiver between transmit and re-
ceive when keying. The IC-756PROIII is capable for
full break-in or semi break-in.

D Semi break-in operation

During semi break-in operation, the transceiver se-
lects transmit when keying, then automatically returns
to receive after a pre-set time from when you stop
keying.
[BK-IN]
[BK-IN DELAY] [KEY SPEED]

D Full break-in operation

During full break-in operation, the transceiver auto-
matically selects transmit while keying and returns to
receive immediately after keying is finished.
[BK-IN]
[BK-IN DELAY] [KEY SPEED]
67
q Push [CW/RTTY] to select CW or CW-R mode.
w Push [BK-IN] several times to turn the semi break-
in function ON.
• "BK-IN SEMI" appears.
e Rotate [BK-IN DELAY] to set the break-in delay
time (the delay from transmit to receive).
When using a paddle, rotate [KEY SPEED] to ad-
just the keying speed.
q Push [CW/RTTY] to select CW or CW-R mode.
w Push [BK-IN] several times to turn the full break-in
function ON.
• "BK-IN FULL" appears.
When using a paddle, rotate [KEY SPEED] to ad-
just the keying speed.