D Scope Set Mode - Icom IC-756PROIII Instruction Manual

D Scope set mode

The spectrum scope shows the transmit signal wave-
form while transmitting. This can be deactivated if de-
sired.
[(F-1)Y] [(F-2)Z]
AGC AGC
S c o p e Sc op e d u r i n g du ri n g T x T x
MID MID
Ma x H o l d M a x Ho ld
VOX VOX
OFF OFF
COMP COMP
OFF OFF
WIDE WIDE
é è
S S c c o o p p e e d d u u r r i i n n g g T T x x
Turn the transmitting signal waveform indication ON
and OFF.
M M a a x x H H o o l l d d
Turn the peak level holding function ON and OFF.
[EXIT/SET] [(F-3)DEF]
SC O P E S E T S C O P E SE T
O N O N
O N O N
DEF DEF
FUNCTION FOR RECEIVE
The spectrum scope shows the transmit signal wave-
form while transmitting. This can be deactivated if de-
sired.
When "OFF" is selected, the spectrum scope holds
the received waveform while transmitting and does
not show the transmit waveform.
q During spectrum scope indication ON, push [(F-5)
SET] to select scope set mode screen.
w Push [(F-5)SET] to select the spectrum scope set
mode.
e Push [(F-1)Y Y ] or [(F-2)Z Z ] to select the desired set
item.
r Rotate the tuning dial to select the desired condi-
tion.
• Push [(F-3)DEF] for 1 sec. to select a default condition.
t Push [EXIT/SET] to exit spectrum scope set
mode.
When "OFF" is selected, the spectrum scope holds
the received waveform while transmitting and does
not show the transmit waveform. (default: ON)
(default: ON)
4
5
56