Snmp-Server Enable - Cisco Catalyst 6500 Series Command Reference Manual

snmp-server enable

snmp-server enable
To configure the SNMP traps and informs, use the snmp-server enable command. Use the no form of
this command to disable SNMP traps and informs.
Syntax Description informs
traps
ipsec
isakmp
snmp
ssl-proxy
cert-expiring
oper-status
Defaults This command has no default setting.
Command Modes
Global configuration
Command History Release
SSL Services Module
Release 2.1(1)
Examples
This example shows how to enable SNMP informs:
ssl-proxy (config)# snmp-server enable informs
ssl-proxy (config)#
This example shows how to enable SSL-proxy traps:
ssl-proxy (config)# snmp-server enable traps ssl-proxy
ssl-proxy (config)#
This example shows how to enable SSL-proxy notification traps:
ssl-proxy (config)# snmp-server enable traps ssl-proxy cert-expiring oper-status
ssl-proxy (config)#
Catalyst 6500 Series Switch SSL Services Module Command Reference
2-86
snmp-server enable {informs | traps {ipsec | isakmp | snmp | {ssl-proxy [cert-expiring]
[oper-status]}}}
no snmp-server enable {informs | traps {ipsec | isakmp | snmp | {ssl-proxy [cert-expiring]
[oper-status]}}}
Enables SNMP informs.
Enables SNMP traps.
Enables IPsec traps.
Enables ISAKMP traps.
Enables SNMP traps.
Enables SNMP SSL proxy notification traps.
(Optional) Enables SSL proxy certificate-expiring notification traps.
(Optional) Enables SSL proxy operation-status notification traps.
Modification
Support for this command was introduced on the Catalyst 6500 series
SSL Services Module.
Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module
OL-9105-01