ssl-proxy ip-frag-ttl
ssl-proxy ip-frag-ttl
To adjust the IP fragment reassembly timer, use the ssl-proxy ip-frag-ttl command.
Syntax Description
time
Defaults
time is 6 seconds.
Command Modes
Global configuration
Command History
Release
SSL Services Module
Release 3.1(1)
Examples
This example shows how to configure the IP reassembly timeout to 60 seconds:
ssl-proxy(config)# ssl-proxy ip-frag-ttl 60
ssl-proxy(config)#
Catalyst 6500 Series Switch SSL Services Module Command Reference
2-94
ssl-proxy ip-frag-ttl time
Modification
Support for this command was introduced on the Catalyst 6500 series
SSL Services Module.
Chapter 2
Commands for the Catalyst 6500 Series SSL Services Module
(Optional) Adjust the IP fragment reassembly timer; valid values
are from 3 to 120 seconds.
OL-9105-01