Cisco Catalyst 6500 Series Command Reference Manual page 36

crypto pki import pem
The crypto pki import pem command imports only the private key (.prv), the server certificate (.crt),
and the issuer CA certificate (.ca). If you have more than one level of CA in the certificate chain, you
need to import the root and subordinate CA certificates before this command is issued for authentication.
Use cut-and-paste or TFTP to import the root and subordinate CA certificates.
Examples This example shows how to import a PEM-formatted file from the SSL Services Module:
ssl-proxy(config)# crypto pki import TP5 pem url tftp://10.1.1.1/TP5 password
% Importing CA certificate...
Address or name of remote host [10.1.1.1]?
Destination filename [TP5.ca]?
Reading file from tftp://10.1.1.1/TP5.ca
Loading TP5.ca from 10.1.1.1 (via Ethernet0/0.168): !
[OK - 1976 bytes]
% Importing private key PEM file...
Address or name of remote host [10.1.1.1]?
Destination filename [TP5.prv]?
Reading file from tftp://10.1.1.1/TP5.prv
Loading TP5.prv from 10.1.1.1 (via Ethernet0/0.168): !
[OK - 963 bytes]
% Importing certificate PEM file...
Address or name of remote host [10.1.1.1]?
Destination filename [TP5.crt]?
Reading file from tftp://10.1.1.1/TP5.crt
Loading TP5.crt from 10.1.1.1 (via Ethernet0/0.168): !
[OK - 1692 bytes]
% PEM files import succeeded.
ssl-proxy(config)# end
ssl-proxy#
*Apr 11 15:11:29.901: %SYS-5-CONFIG_I: Configured from console by console
Related Commands crypto pki export pem
Catalyst 6500 Series Switch SSL Services Module Command Reference
2-10
Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module
OL-9105-01