Chapter 2
Commands for the Catalyst 6500 Series SSL Services Module
show ssl-proxy stats
To display information about the statistics counter, use the show ssl-proxy stats command.
Syntax Description
type
Defaults
This command has no default settings.
Command Modes
EXEC
Command History
Release
Cisco IOS Release
12.1(13)E and
SSL Services Module
Release 1.1(1)
SSL Services Module
Release 1.2(1)
SSL Services Module
Release 3.1(1)
Usage Guidelines
The type values are defined as follows:
•
•
•
•
•
•
OL-9105-01
show ssl-proxy stats [type]
(Optional) Information type; valid values are content, context, crypto, fdu,
hdr, ipc, module, pki, service, ssl, tcp, and url. See the "Usage
Guidelines" section for additional information.
Modification
Support for this command was introduced on the Catalyst 6500 series
switches.
The output of the show ssl-proxy stats command was changed to
include information about the session allocation failure and session
limit-exceed table.
This command was changed to add the following keywords:
content
•
context
•
•
hdr
module module
•
url
•
content—Displays content scan object statistics.
context—Displays context statistics information.
crypto—Displays crypto statistics.
fdu—Displays FDU statistics.
hdr—Displays HTTP header insertion statistics.
ipc—Displays IPC statistics.
Catalyst 6500 Series Switch SSL Services Module Command Reference
show ssl-proxy stats
2-77