Show Ssl-Proxy Status - Cisco Catalyst 6500 Series Command Reference Manual

show ssl-proxy status

show ssl-proxy status
To display information about the SSL Services Module proxy status, use the show ssl-proxy status
command.
Syntax Description fdu
ssl
tcp
Defaults This command has no default settings.
Command Modes
EXEC
Command History Release
Cisco IOS Release
12.1(13)E and
SSL Services Module
Release 1.1(1)
SSL Services Module
Release 1.2(1)
SSL Services Module
Release 3.1(1)
Examples
This example shows how to display the status of the SSL Services Module:
ssl-proxy# show ssl-proxy status
FDU cpu is alive!
FDU cpu utilization:
Catalyst 6500 Series Switch SSL Services Module Command Reference
2-82
show ssl-proxy status [fdu | ssl | tcp]
(Optional) Displays the FDU status.
(Optional) Displays the SSL status.
(Optional) Displays the TCP status.
Modification
Support for this command was introduced on the Catalyst 6500 series
switches.
The output of the show ssl-proxy status command was changed to
include statistics that are displayed at a 5-second, 1-minute, and
5-minute traffic rate for CPU utilization.
This command was changed to add the following keywords:
•
•
•
% process util : 0
proc cycles : 0x2DB3980C
total cycles: 0x4E75127FCEA4
% process util (5 sec)
% process util (1 min)
% process util (5 min)
Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module
fdu
ssl
tcp
% interrupt util : 0
int cycles : 0x2ADACD71
: 0 % interrupt util (5 sec) : 0
: 0 % interrupt util (1 min): 0
: 0 % interrupt util (5 min) : 0
OL-9105-01