Crypto Key Decrypt Rsa - Cisco Catalyst 6500 Series Command Reference Manual

Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module

crypto key decrypt rsa

To delete the encrypted key and leave only the unencrypted key, use the crypto key decrypt rsa
command.
Syntax Description write
name key-name
passphrase passphrase Pass phrase.
Defaults
This command has no default settings.
Command Modes Global configuration mode
Command History Release
SSL Services Module
Release 3.1(1)
Usage Guidelines Entering the write keyword immediately saves the unencrypted key to NVRAM. If you do not enter the
write keyword, you must manually write the configuration to NVRAM; otherwise, the key remains
encrypted the next time that the router is reloaded.
Examples This example shows how to display the administration VLAN and related IP and gateway addresses:
ssl-proxy(config)# crypto key decrypt rsa name pki1-72a.cisco.com passphrase cisco1234
WARNING: Configuration with decrypted key not saved.
Please save it manually as soon as possible to
save decrypted key
ssl-proxy(config)# end
ssl-proxy# show crypto key mypubkey rsa
Key name: pki1-72a.cisco.com
Usage: General Purpose Key
Key is not exportable.
Key Data:
30819F30 0D06092A 864886F7 0D010101 05000381
...
% Key pair was generated at: 15:42:15 PST Jun
ssl-proxy#
Related Commands crypto key encrypt rsa
crypto key lock rsa
crypto key unlock rsa
OL-9105-01
crypto key decrypt [write] rsa [name key-name] passphrase passphrase
(Optional) Writes the configuration to the startup configuration.
(Optional) Name of the key.
Modification
Support for this command was introduced on the Catalyst 6500 series
SSL Services Module.
Catalyst 6500 Series Switch SSL Services Module Command Reference
crypto key decrypt rsa
2-15