Show Ssl-Proxy Crash-Info - Cisco Catalyst 6500 Series Command Reference Manual

show ssl-proxy crash-info

show ssl-proxy crash-info
To collect information about the software-forced reset from the SSL Services Module, use the show
ssl-proxy crash-info command.
Syntax Description brief
details
Defaults
This command has no default settings.
Command Modes
EXEC
Command History Release
Cisco IOS Release
12.1(13)E and
SSL Services Module
Release 1.1(1)
Examples This example shows how to collect information about the software-forced reset:
ssl-proxy# show ssl-proxy crash-info
===== SSL SERVICE MODULE - START OF CRASHINFO COLLECTION =====
------------- COMPLEX 0 [FDU_IOS] ----------------------
NVRAM CHKSUM:0xEB28
NVRAM MAGIC:0xC8A514F0
NVRAM VERSION:1
++++++++++ CORE 0 (FDU) ++++++++++++++++++++++
CID:0
APPLICATION VERSION:2003.04.15 14:50:20 built for cantuc
APPROXIMATE TIME WHEN CRASH HAPPENED:14:06:04 UTC Apr 16 2003
THIS CORE DIDN'T CRASH
TRACEBACK:222D48 216894
CPU CONTEXT
$0 :00000000, AT :00240008, v0 :5A27E637, v1 :000F2BB1
a0 :00000001, a1 :0000003C, a2 :002331B0, a3 :00000000
t0 :00247834, t1 :02BFAAA0, t2 :02BF8BB0, t3 :02BF8BA0
t4 :02BF8BB0, t5 :00247834, t6 :00000000, t7 :00000001
Catalyst 6500 Series Switch SSL Services Module Command Reference
2-68
show ssl-proxy crash-info [brief | details]
(Optional) Collects a small subset of software-forced reset information,
limited to processor registers.
(Optional) Collects the full set of software-forced reset information,
including exception and interrupt stacks dump (this process can take up to
10 minutes to complete printing).
Modification
Support for this command was introduced on the Catalyst 6500 series
switches.
-----------------------------
Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module
OL-9105-01