Cisco Catalyst 6500 Series Command Reference Manual page 80

Ssl services module command reference
Hide thumbs Also See for Catalyst 6500 Series:
Table of Contents

Advertisement

service
Table 2-8
Proxy-service Configuration Submode Command Descriptions (continued)
Syntax
virtual policy ssl ssl-policy-name
virtual policy tcp
client-side-tcp-policy-name
vlan vlan
Both secured and bridge mode between the Content Switching Module (CSM) and the SSL Services
Module is supported.
Use the secondary keyword (optional) for bridge-mode topology.
Examples
This example shows how to enter the proxy-service configuration submode:
ssl-proxy (config)# ssl-proxy context s1
ssl-proxy (config-context)# service S6
ssl-proxy (config-ctx-ssl-proxy)#
This example shows how to configure the method for certificate verification:
ssl-proxy (config-ctx-ssl-proxy)# authenticate verify all
ssl-proxy (config-ctx-ssl-proxy)#
This example shows how to configure the certificate for the specified SSL-proxy services:
ssl-proxy (config-ctx-ssl-proxy)# certificate rsa general-purpose trustpoint tp1
ssl-proxy (config-ctx-ssl-proxy)#
These examples show how to set a specified command to its default value:
ssl-proxy (config-ctx-ssl-proxy)# default certificate
ssl-proxy (config-ctx-ssl-proxy)# default inservice
ssl-proxy (config-ctx-ssl-proxy)# default nat
ssl-proxy (config-ctx-ssl-proxy)# default server
ssl-proxy (config-ctx-ssl-proxy)# default virtual
ssl-proxy (config-ctx-ssl-proxy)#
This example shows how to apply a trusted-certificate authenticate configuration to a proxy server:
ssl-proxy (config-ctx-ssl-proxy)# trusted-ca test1
ssl-proxy (config-ctx-ssl-proxy)#
This example shows how to configure a virtual IP address for the specified virtual server:
ssl-proxy (config-ctx-ssl-proxy)# virtual ipaddr 207.59.100.20 protocol tcp port 443
ssl-proxy (config-ctx-ssl-proxy)#
This example shows how to configure the SSL policy for the specified virtual server:
ssl-proxy (config-ctx-ssl-proxy)# virtual policy ssl sslpl1
ssl-proxy (config-ctx-ssl-proxy)#
This example shows how to configure the TCP policy for the specified virtual server:
ssl-proxy (config-ctx-ssl-proxy)# virtual policy tcp tcppl1
ssl-proxy (config-ctx-ssl-proxy)#
Catalyst 6500 Series Switch SSL Services Module Command Reference
2-54
Chapter 2
Description
Applies an SSL policy with the client side of a proxy server.
Applies a TCP policy to the client side of a proxy server.
Virtual Service VLAN configuration
Commands for the Catalyst 6500 Series SSL Services Module
OL-9105-01

Advertisement

Table of Contents
loading

Table of Contents