Crypto Key Import Rsa Pem - Cisco Catalyst 6500 Series Command Reference Manual

Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module

crypto key import rsa pem

To import a PEM-formatted RSA key from an external system, use the crypto key import rsa pem
command.
Syntax Description keylabel
usage-keys
terminal
url url
exportable
passphrase
Defaults
This command has no default settings.
Command Modes Global configuration
Command History Release
SSL Services Module
Release 1.2(1)
Usage Guidelines
The pass phrase can be any phrase including spaces and punctuation except for the question mark (?),
which has a special meaning to the Cisco IOS parser.
Pass-phrase protection associates a pass phrase with the key. The pass phrase is used to encrypt the key
when it is exported. When this key is imported, you must enter the same pass phrase to decrypt it.
OL-9105-01
crypto key import rsa keylabel pem [usage-keys] {terminal | url url} [exportable] passphrase
Name of the key.
(Optional) Specifies that two special-usage key pairs should be generated,
instead of one general-purpose key pair.
Displays the request on the terminal.
Specifies the URL location. Valid values are as follows:
ftp:—Imports from the FTP: file system
•
null:—Imports from the null: file system
•
nvram:—Imports from the NVRAM: file system
•
rcp:—Imports from the RCP: file system
•
scp:—Imports from the SCP: file system
•
• system:—Imports from the system: file system
• tftp:—Imports from the TFTP: file system
(Optional) Specifies that the key can be exported.
Pass phrase.
Modification
Support for this command was introduced on the Catalyst 6500 series
switches.
Catalyst 6500 Series Switch SSL Services Module Command Reference
crypto key import rsa pem
2-19