Show Ssl-Proxy Conn - Cisco Catalyst 6500 Series Command Reference Manual

show ssl-proxy conn

show ssl-proxy conn
To display the TCP connections from the SSL Services Module, use the show ssl-proxy conn command.
Syntax Description
4tuple
local
ip local-ip-addr
local-port
remote
ip remote-ip-addr
port remote-port
port local-port
module module
service name
context name
Defaults This command has no default settings.
Command Modes EXEC
Catalyst 6500 Series Switch SSL Services Module Command Reference
2-64
show ssl-proxy conn 4tuple [local {ip local-ip-addr local-port} [remote [{ip remote-ip-addr [port
remote-port]} | {port remote-port [ip remote-ip-addr]}]]]
show ssl-proxy conn 4tuple [local {port local-port} [remote [{ip remote-ip-addr [port
remote-port]} | {port remote-port [ip remote-ip-addr]}]]]
show ssl-proxy conn 4tuple [local {remote [{ip remote-ip-addr [port remote-port]} | {port
remote-port [ip remote-ip-addr]}]]
show ssl-proxy conn module module
show ssl-proxy conn service name [context name] module [module]
Displays the TCP connections for a specific address.
(Optional) Displays the TCP connections for a specific local device.
IP address of a local device.
Port number of a local device.
(Optional) Displays the TCP connections for a specific remote device.
IP address of a remote device.
Port number of a remote device.
(Optional) Displays the TCP connections for a specific local port.
(Optional) Displays the information for a specific module.
The available options for the module variable are as follows:
•
•
•
•
Displays the connections for a specific proxy service.
(Optional) Displays information about the specified context.
Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module
all—all CPUs
fdu—FDU CPU
ssl1—SSL1 CPU
tcp1—TCP1 CPU
OL-9105-01