Pool Ca - Cisco Catalyst 6500 Series Command Reference Manual

Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module

pool ca

To enter the certificate authority pool configuration submode, use the pool ca command. In the
certificate authority pool configuration submode, you can configure a certificate authority pool, which
lists the CAs that the module can trust.
Syntax Description ca-pool-name
Defaults
This command has no arguments or keywords.
Command Modes Context subcommand mode
Command History Release
SSL Services Module
Release 2.1(1)
SSL Services Module
Release 3.1(1)
Usage Guidelines Enter each certificate-authority pool configuration submode command on its own line.
Table 2-7
Table 2-7
Syntax
ca
default
exit
help
Examples This example shows how to add a certificate-authority trustpoint to a pool:
ssl-proxy(config)# ssl-proxy context s1
ssl-proxy(config-context)# pool ca test1
ssl-proxy(config-ctx-ca-pool)# ca trustpoint test20
ssl-proxy(config-ctx-ca-pool)#
OL-9105-01
pool ca ca-pool-name
Certificate authority pool name.
Modification
Support for this command was introduced on the Catalyst 6500 series
switches.
The pool ca command (entered in context subcommand mode) replaces
the ssl-proxy pool ca command (entered in global subcommand mode).
lists the commands that are available in certificate-authority pool configuration submode.
Proxy-policy TCP Configuration Submode Command Descriptions
Description
Configures a certificate authority. The available subcommand is as follows:
trustpoint ca-trustpoint-name—Configures a certificate-authority trustpoint.
Use the no form of this command to return to the default setting.
Sets a command to its default settings.
Exits from proxy-service configuration submode.
Allows you to configure the connection-establishment timeout; valid values are
from 5 to 75 seconds. Use the no form of this command to return to the default
setting.
Catalyst 6500 Series Switch SSL Services Module Command Reference
pool ca
2-51