Cisco Catalyst 6500 Series Command Reference Manual page 83

Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module
Table 2-9
Table 2-9 Proxy-client Configuration Submode Command Descriptions
Syntax
certificate rsa general-purpose trustpoint
trustpoint-name
default {certificate | inservice | nat | server |
virtual}
description
exit
help
inservice
nat {server | client natpool-name}
policy health-probe tcp policy-name
policy http-header policy-name
policy urlrewrite policy-name
server ipaddr ip-addr protocol protocol
port portno [sslv2]
server policy tcp
server-side-tcp-policy-name
virtual ipaddr ip-addr protocol protocol
port portno [secondary]
virtual policy ssl ssl-policy-name
virtual policy tcp
client-side-tcp-policy-name
vlan vlan
Both secured mode and bridge mode between the Content Switching Module (CSM) and the SSL
Services Module are supported.
Use the secondary keyword (optional) for the bridge-mode topology.
OL-9105-01
lists the commands that are available in proxy-client configuration submode.
Description
Configures the certificate with RSA general-purpose keys and associates a
trustpoint to the certificate.
Sets a command to its default settings.
Allows you to enter a description for the proxy service.
Exits from proxy-client configuration submode.
Provides a description of the interactive help system.
Declares a proxy client as administratively up.
Specifies the usage of either server NAT or client NAT for the server-side
connection that is opened by the SSL Services Module.
Applies a TCP health probe policy to a proxy server.
Applies an HTTP header insertion policy to a proxy server.
Applies a URL rewrite policy to the proxy server.
Defines the IP address of the target server for the proxy server. You can also
specify the port number and the transport protocol. The target IP address can
be a virtual IP address of an SLB device or a real IP address of a web server.
The sslv2 keyword enables SSL version 2.
Applies a TCP policy to the server side of a proxy server. You can specify the
port number and the transport protocol.
Defines the IP address of the target server for the proxy server. You can also
specify the port number and the transport protocol. The target IP address can
be a virtual IP address of an SLB device or a real IP address of a web server.
Applies an SSL policy with the client side of a proxy server.
Applies a TCP policy to the client side of a proxy server.
Virtual Service VLAN configuration.
Catalyst 6500 Series Switch SSL Services Module Command Reference
service client
2-57