Policy Ssl - Cisco Catalyst 6500 Series Command Reference Manual

Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module

policy ssl

To enter the SSL-policy configuration submode, use the policy ssl command. In the SSL-policy
configuration submode, you can define the SSL policy for one or more SSL-proxy services.
Syntax Description ssl-policy-name
Defaults
The defaults are as follows:
•
•
•
•
•
•
•
•
•
•
Command Modes Context subcommand mode
Command History Release
Cisco IOS Release
12.1(13)E and
SSL Services Module
Release 1.1(1)
SSL Services Module
Release 1.2(1)
OL-9105-01
policy ssl ssl-policy-name
SSL policy name.
cipher is all-strong.
close-protocol is disabled.
session-caching is enabled.
version is all.
session-cache size size is 262143 entries.
timeout session timeout is 0 seconds.
timeout handshake timeout is 0 seconds.
cert-req empty is disabled.
tls-rollback is disabled.
renegotiation is disabled.
Modification
Support for this command was introduced on the Catalyst 6500 series
switches.
This command was changed to add the following subcommands:
session-cache size size
•
timeout session timeout [absolute]
•
Catalyst 6500 Series Switch SSL Services Module Command Reference
policy ssl
2-39