Wireless Exposure Button - AGFA DR 100s User Manual

42 | DR 100s | Introduction

Wireless exposure button

The wireless exposure button is optional.
1
2
3
4
5
Exposure button
1.
Collimator light button
2.
Touch sensor
3.
Status indicators
4.
Led beacon light
5.
Figure 21: Wireless exposure button and its holder
The operating range of the wireless exposure button is 10m. Check the
wireless environment beforehand for conditions that may cause a
communications error, e.g. obstacles between the holder and the wireless
exposure button, equipment using micro waves or wireless devices using 2.4
GHz.
When the wireless exposure button is taken out of the holder, the touch sensor
will prevent triggering the exposure button unless it is firmly gripped by the
hand.
If the wireless exposure button is moved out of range of the holder, the
connection is broken. The connection is automatically restored when the
wireless exposure button returns in the range of the holder. If the wireless
exposure button remains out of range of the holder for a longer time, it enters
sleep mode. The connection is only restored after placing the wireless
exposure button back in the holder.
When the system is powered off, a lock mechanism prevents taking the
wireless exposure button out of the holder.
Table 5: Status indicators on the holder of the wireless exposure button
Name
POW
0411D EN 20220627 1040
Color Meaning
Power is supplied to the holder of the wireless exposure
button.