Table of Contents
Advertisement
16 | CR Reader, CR Advanced Reader, CR Multiformat Reader | Introduction to CR Reader,
CR Advanced Reader and CR Multiformat Reader
The Erase Button
Press the erase button
pressing the erase button, the status indicator is continuously lighting up in
blue and the digitizer starts erasing the image plate of the cassette inserted
next. If no cassette with image plate has been inserted after 60 seconds, the
system automatically returns to standby mode.
Related Links
Re-erasing an Image Plate
2591D EN 20191028 1712
to start the erasing cycle of an image plate. After
on page 56
Advertisement
Table of Contents
