Table of Contents
Advertisement
100 | DR 100s | Basic Workflow
Charging the DR 100s battery
Charging the DR 100s battery can be started any time, regardless if the system
is on or off. While the battery is charging, all motorized functions of the
system are disabled. It is still possible to make exposures.
1. Unroll the mains cable from the cable reel and extend it completely.
2. Plug the cable into a mains power socket.
Check if the switch of the circuit breaker next to the cable reel is in
position "I".
Battery charging is started automatically.
Green leds
1.
Orange leds
2.
While charging, the orange leds light up continuously and the green leds light
up one after the other in a loop.
In case of error, all leds blink synchronously.
When not making exposures, keep the equipment connected to the mains
(maximum 48 hours), to allow the batteries to stay under continuous charge.
Ensure that the batteries are fully charged at least once a month. It increases
the useful lifespan of the batteries.
0411D EN 20220627 1040
CAUTION:
To charge the battery, place the system in a well-ventilated area.
1
2
Advertisement
Table of Contents
