Step 1: Retrieve The Patient Info; Step 2: Select The Exposure - AGFA DX-D 60C User Manual

62 | DX-D 60C, DX-D 60G | Getting started

Step 1: retrieve the patient info

At the NX workstation:
1. When a new patient comes in, define the patient info for the exam.
2. Start the exam.

Step 2: select the exposure

1. At the NX workstation, select the thumbnail for the exposure in the Image
Overview pane of the Examination window.
The selected DR Detector is activated.
The DR Detector Switch shows the active DR Detector and shows its status.
• Red (flashing): starting up
• Green (constant): ready for exposure
2. At the X-ray generator console, select the exposure settings suitable for the
exposure.
0294B EN 20190221 1131