Table of Contents
Advertisement
Adding a start-up only RFID key card to the configuration of
the RFID reader
Only users who have a Windows administrator account can perform this task.
1. On the NX workstation, go to the Main Menu.
2. Click the Show Desktop action button.
The Windows desktop is shown.
3. Go to the Windows Start menu > Agfa and click RFID Config Tool.
The RFID Configuration Tool dialog is displayed.
4. Select the tab Configure Users.
5. Put the new RFID key on the RFID reader.
The serial number of the RFID key is filled in.
6. Check the box Startup mode only.
Figure 64: RFID Configuration Tool
7. Click Save.
A new line is added to the list of configured RFID keys.
8. Click Send to Device.
The card can be used for starting the DR 100s.
9. Close the RFID Configuration Tool.
DR 100s | Advanced Operation | 141
0411D EN 20220627 1040
Advertisement
Table of Contents
