Automatic Collimator - AGFA DR 100s User Manual

36 | DR 100s | Introduction

Automatic Collimator

5
4
Touchscreen display
1.
Longitudinal collimation
2.
Rails to insert a DAP meter or a filter.
3.
Measurement tape to measure the source image distance (SID).
4.
The measurement tape is at the rear side of the collimator.
Transversal collimation
5.
Buttons to switch on the light field and laser light are available on the
software console, on the tube head display and on the exposure button.
0411D EN 20220627 1040
1
2
3