X-Ray Modality Controls; Collimator Parameters - AGFA DR 100s User Manual

X-ray modality controls

1
2
3
4
5
Select the modality position.
1.
Select the DR detector or switch to CR.
2.
All configured detectors are displayed. Only the detectors that can be used
with the selected modality position, can be selected.
Select the filter.
3.
Collimation controls
4.
Automated workflow for warming-up of the X-ray tube
5.
Figure 58: X-ray modality controls

Collimator Parameters

On systems with an automatic collimator, the collimation is automatically set,
based on the selected exposure.
To use the same collimation setting on subsequent exposures, push the restore
button to restore the collimation setting of the previous exposure.
Table 26: Collimator settings
Icon Description
Readout of the actual collimation setting.
Restore the collimation setting of the previous exposure.
DR 100s | Software Console | 129
0411D EN 20220627 1040