Driving The Unit - AGFA DR 100s User Manual

84 | DR 100s | Basic Workflow

Driving the unit

1. Check if the unit is in secured position.
Check if the catch has successfully locked the X-ray tube head, by trying to
push it upward without touching the brake controls.
2. Grip and hold the locking bar towards the handlebar.
1.
0411D EN 20220627 1040
WARNING:
Exceeding speed while driving from a ramp. To drive from a
ramp safely, reduce the speed by intermittently releasing the
drive handle.
WARNING:
The uncontrolled movement of the equipment could cause
damages to the operator, patient and personnel in proximity of
it. The equipment must be moved only in the secured position
and with all the blocks of the movements activated.
CAUTION:
Risk of tilting during use or transport on inclined floors. Do not
use the unit on floors with an inclination higher than 5 degrees.
Do not drive the unit on ramps with an inclination higher than
10 degrees.
CAUTION:
During the movement, the equipment could pass on feet or
objects located on the floor, causing damages or injuries. Do not
stand in front of the equipment. Pay a lot of attention when
moving the equipment.
Note: If you use a wired network the network cable must be
unplugged to be able to perform this step.
1
2
Handlebar