Problem With Rfid Reader While Starting Or Stopping Dr 100S - AGFA DR 100s User Manual

Problem with RFID reader while starting or stopping
DR 100s
Details
First problem
situation
Solution
Second prob-
lem situation
First solution
Second solu-
tion
The procedure to start or to stop DR 100s does not succeed.
The power status indicator light is off or blinking.
The power status indicator light is not starting to blink
when an RFID key is put on the RFID reader.
Press and hold the power off button for 3 seconds.
Try reading an RFID key.
The power status indicator light keeps blinking while
there's no RFID key on the RFID reader.
Check if there's an RFID key laying close by the RFID read-
er. Remove the RFID key. The indicator light stops blinking.
Press and hold the power off button for 10 seconds.
Try reading an RFID key.
DR 100s | Problem solving | 151
0411D EN 20220627 1040