Figure 4-2 Menu 11.1 Remote Node Profile; Table 4-1 Remote Node Profile Menu Fields - ZyXEL Communications Prestige 645R User Manual

Scene 3. Multiple VCs
If you have an equal number (or more) of VCs than the number of protocols, then select RFC-1483
encapsulation and VC-based multiplexing.
Rem Node Name= ChangeMe
Active= Yes
Encapsulation= PPP
Multiplexing= VC-based
Incoming:
Rem Login=
Rem Password=********
Outgoing:
My Login= oscar
My Password= ********
Authen= CHAP/PAP
Press ENTER to CONFIRM or ESC to CANCEL:
FIELD
Rem Node Name
Active
Remote Node Configuration
Menu 11.1 - Remote Node Profile
Route= IP
Bridge= No
Edit PPP Options= No
Rem IP Addr= 0.0.0.0
Edit IP/IPX/Bridge= No
Session Options:
Edit Filter Sets= No
PPPoE Idle Timeout (sec)= N/A
PPPoE Service Name= N/A
Schedule Sets= N/A

Figure 4-2 Menu 11.1 Remote Node Profile

Table 4-1 Remote Node Profile Menu Fields

This is a required field [?]. Enter a descriptive name for the
remote node, for example, "Changeme". This field can be up to
eight characters. This name must be unique from any other
remote node name.
Press the [SPACE BAR] to select either Yes or No. Inactive
nodes are displayed with a minus sign (-) at the beginning of
the name in menu 11.
Prestige P645 ADSL Internet Access Router
DESCRIPTION
Enter a unique
name, up to eight
characters, for the
remote node.
Use 0.0.0.0 to
connect to your
ISP or enter the IP
address of the
remote gateway
here.
EXAMPLE
Changeme
No
4-3