Figure 5-2 Menu 11.1-Remote Node Profile; Table 5-1 Remote Node Profile Menu Fields - ZyXEL Communications Prestige 650M User Manual

Prestige 650M ADSL Bridge
Rem Node Name= ChangeMe
Active= Yes
Encapsulation= RFC 1483
Multiplexing= LLC-based
Incoming:
Rem Login= N/A
Rem Password= N/A
Outgoing:
My Login= N/A
My Password= N/A
Authen= N/A
Fill in the fields as described in the following table. Please see Chapter 4 for more background information.
FIELD
Rem Node Name
Active
Encapsulation
Multiplexing
Incoming:
Rem Login
Rem Password
Outgoing:
5-2
Menu 11.1 - Remote Node Profile
Press ENTER to Confirm or ESC to Cancel:

Figure 5-2 Menu 11.1-Remote Node Profile

Table 5-1 Remote Node Profile Menu Fields

Type a unique, descriptive name of up to eight characters for this
node.
Press [SPACE BAR] and then [ENTER] to select Yes to activate or
No to deactivate this node. Inactive nodes are displayed with a
minus sign "–" in SMT menu 11.
PPPoA refers to RFC-2364 (PPP Encapsulation over ATM
Adaptation Layer 5).
If you select RFC 1483 (Multiprotocol Encapsulation over ATM
Adaptation Layer 5) then Rem Login, Rem Password, My Login
and My Password fields are not applicable (N/A).
Press [SPACE BAR] and then [ENTER] to select the method of
multiplexing that your ISP uses, either VC-based or LLC-based.
Type the login name that this remote node will use to call your
Prestige. The login name and the Rem Password will be used to
authenticate this node.
Type the password used when this remote node calls your
Prestige.
Bridge:
Ethernet Addr Timeout(min)= 0
VPI #= 1
VCI #= 32
ATM QoS Type= UBR
Peak Cell Rate (PCR)= 0
Sustain Cell Rate (SCR)= 0
Maximum Burst Size (MBS)= 0
Filter Sets:
Input Device Filters=
Output Device Filters=
DESCRIPTION EXAMPLE
ChangeMe
Yes
RFC 1483
LLC-based
Remote Node Configuration