Figure 39-1 Menu 24.11 Remote Management Control; Table 39-1 Menu 24.11 Remote Management Control - ZyXEL Communications PRESTIGE 652H User Manual

Prestige 652 Series User's Guide
Enter 11, from menu 24, to display Menu 24.11 — Remote Management Control (shown next).
TELNET Server:
Server Port = 23
Secured Client IP = 0.0.0.0
FTP Server:
Server Port = 21
Secured Client IP = 0.0.0.0
Web Server:
Server Port = 80
Secured Client IP = 0.0.0.0
The following table describes the fields in this menu.
FIELD
Telnet Server
FTP Server
Web Server
Port
Access
Secured Client IP
Once you have filled in this menu, press [ENTER] at the message "Press ENTER to Confirm or ESC to
Cancel" to save your configuration, or press [ESC] to cancel.
39.2.2 Remote Management Limitations
Remote management over LAN or WAN will not work when:
39-2
Menu 24.11 - Remote Management Control
Press ENTER to Confirm or ESC to Cancel:

Figure 39-1 Menu 24.11 Remote Management Control

Table 39-1 Menu 24.11 Remote Management Control

Each of these read-only labels denotes a service that you may use
to remotely manage the Prestige.
This field shows the port number for the remote management
service. You may change the port number for a service if needed,
but you must use the same port number to use that service for
remote management.
Select the access interface (if any) by pressing the [SPACE BAR].
Choices are: LAN only, WAN only, All or Disable. The default is
LAN only.
The default 0.0.0.0 allows any client to use this service to remotely
manage the Prestige. Enter an IP address to restrict access to a
client with a matching IP address.
Server Access = LAN only
Server Access = LAN only
Server Access = LAN only
DESCRIPTION EXAMPLE
23
LAN only
0.0.0.0
Remote Management