Rackmount Shelf; Figure 6 Wallmount Bracket - Nortel BCM50 Installation And Maintenance Manual

52 BCM50 hardware
Each wallmount bracket includes a cable management tray you use to store and organize the cables
connected to the BCM50 units (see

Figure 6 Wallmount bracket

Rackmount shelf

To rackmount a BCM50 unit, you need a rackmount shelf. The rackmount shelf mounts in a
standard 19-inch equipment rack. The BCM50 unit then clips into the tabs on the rackmount shelf.
These tabs prevent the unit from sliding around or falling off the shelf.
If the BCM50 system includes additional units, another unit can be clipped to a second set of tabs
on the rackmount shelf. Any additional units can be clipped to tabs on the top of the other units
(see Figure 7).
Introduction to the BCM50 hardware
Figure 6 on page 52).