Test A Station Media Bay Module; Test A Trunk Media Bay Module; Return The System To Operation - Nortel BCM50 Installation And Maintenance Manual

194

Return the system to operation

Test a station media bay module

Use the following procedure to test DSM16, DSM32, ASM8, and 4X16 media bay modules
(MBM):
1
Got to an extension that is connected to the MBM.
2
Check for dial tone.
3
Use this extension to make a call to another extension on the system.
4 Use this extension to make a call to an external telephone number.

Test a trunk media bay module

Use the following procedure to test DTM, DDIM, GATM8 and 4X16 media bay modules (MBM):
1 Go to an extension that has access to one of the lines on the MBM.
2 Select the line or line pool to which the line belongs.
3 Check for dial tone.
4 Make a call using the line or line pool.
Return the system to operation
To return the system to operation:
Check if the system programming is still intact. If not, use Element Manager to restore the
system programming. For information about restoring system programming, refer to BCM50
Administration Guide (N0xxxxxxx).
Replace a media bay module