166
Configure the startup parameters
To configure the SNMP manager list
Use the SNMP manager list to specify IP addresses that are allowed to connect to the SNMP agent.
1
From the Configuration tab, double-click the Administrator Access folder to expand it.
2
Select SNMP from the Administrator Access folder.
3
Select the General tab. It is normally selected by default.
4
Click Add... in the SNMP Manager List area. The Add Manager dialog box displays.
5
Enter the IP addressa in the Manager IP Address field.
6
Click Ok.
7
Repeat steps 3 to 6 to add another manager IP address.
To add a new group
This procedure provides the steps to add a new group for your system.
1
From the Configuration tab, double-click the Administrator Access folder to expand it.
2
Select Accounts and Privileges from the Administrator Access folder.
3
Select the View by Groups tab.
4
Click Add... . The Add Group dialog box displays.
5
Enter a name for the group in the Group field.
6
Click Ok.
7
Repeat steps 4 to 6 to add more groups.
To configure group privileges
1
From the Configuration tab, double-click the Administrator Access folder to expand it.
2
Select Accounts and Privileges from the Administrator Access folder.
3
Select the View by Groups tab.
4
Select a group from the Groups list. The Details for Group displays in the lower pane.
5
In the Details for Group pane (General tab), click Add... in the Group Privileges section. A list
of available privileges displays.
6
Select the privilege(s) from the list. Use the Shift key or Ctrl key to select multiples privileges
from the list.
7
Click Ok.
8
Repeat steps 4 to 7 to configure privileges for another group.
Use Element Manager to set the basic parameters