Bcm50 Features; Bcm50 Applications - Nortel BCM50 Installation And Maintenance Manual

44

BCM50 features

• Small system wallmount bracket: A bracket designed for mounting the BCM50 Main Unit
or BCM50 Expansion Unit to a wall. An optional wiring field card (WFC) is available with the
wallmount bracket, which provides RJ-45 connectors for all BCM50 Main Unit trunk and
station interfaces.
• Small system rackmount shelf: A shelf designed for mounting up to four BCM50 units into a
standard 19 inch equipment rack. An optional patch field is available, which provides RJ-45
connectors for all BCM50 Main Unit trunk and station interfaces.
BCM50 features
BCM50 supports the complete range of IP telephony features offered by existing BCM products.
The following features are enabled through the use of keycodes and require no additional
hardware:
• VoIP Gateway (H.323): Up to 12 VoIP trunks
• VoIP Telephony Clients: Up to 32 VoIP Telephony clients, supporting the range of Nortel
Networks Internet Telephones.

BCM50 applications

BCM50 also supports the wide range of high-value applications provided on the existing BCM
platforms. The following applications are enabled through the use of keycodes and require no
additional hardware:
• Voice Messaging for standard voicemail and autoattendant features
• Unified Messaging providing integrated voicemail management between voicemail and
common email applications
• Fax Suite providing support for attached analog fax devices
• Voice Networking features
• LAN CTE
BCM50 overview