Handling The Cross Bar; Removing The Cross Bar - Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

Basic hardware procedures
▶ Install the air duct.
Ensure that the air duct engages in the guiding points.
If there is an FBU installed, see
holder" on page
4.13

Handling the cross bar

4.13.1

Removing the cross bar

Figure 33: Removing the cross bar
▶ Remove the three screws (see circles).
▶ Remove the cross bar.
80
"Removing the FBU with the FBU
324.
Upgrade and Maintenance Manual RX2540 M6