Installing The Server In The Rack - Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

Basic hardware procedures
▶ Insert the cover 1 in a slight angle (1).
CAUTION
▶
Take care that all cables are inside the chassis.
▶ Fold the cover 1 down (2).
4.6.3

Installing the server in the rack

CAUTION
At least two people are needed to position the server on the rack rails.
(For Japan, see "安全上のご注意".)
62
For configurations below 32 kg:
At least two people are needed to lift the server into the
rack cabinet.
For configurations below 55 kg:
At least three people are needed to lift the server into
the rack cabinet.
For configurations above 55 kg:
At least four people are needed to lift the server into the
rack cabinet.
Upgrade and Maintenance Manual RX2540 M6