Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual page 157

Figure 66: Removing the 12x 3.5-inch HDD backplane
▶ Release the nine screws (see circles).
▶ Take out the HDD backplane at a slight angle.
Installing the new 12x 3.5-inch HDD backplane
Figure 67: Installing the 12x 3.5-inch HDD backplane (A)
▶ Insert the HDD backplane into the chassis.
▶ Fasten the nine screws (see circles).
▶ Install the internal RAID riser module, see
module" on page
▶ If applicable, install the SAS expander board holder, see
expander board holder" on page
RX2540 M6
Hard disk drive (HDD) / solid state disk (SSD)
271.
206.
Upgrade and Maintenance Manual
"Installing the internal RAID riser
"Installing the SAS
157