Replacing A 8X 2.5-Inch Hdd Backplane - Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

Removing the defective 2.5-inch PCIe SSD module
▶ Remove the PCIe SSD module, see
module" on page
▶ If applicable, remove the PCIe SSD from the installation frame, see
"Handling HDDs or SSDs without installation frame" on page
Installing the new 2.5-inch PCIe SSD module
▶ If applicable, install the PCIe SSD in the installation frame, see
HDDs or SSDs without installation frame" on page
▶ Install the PCIe SSD module, see
on page 172.
Concluding steps
▶ If applicable,
"Switching on the server" on page
▶ If applicable, rescan available devices from your OS.
▶ If applicable,
"Installing the front cover with lock" on page
7.5.8

Replacing a 8x 2.5-inch HDD backplane

Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver
In configuration with 24x 2.5-inch HDD/SSD/PCIe modules the third
backplane is a combo HDD backplane that also allows to install PCIes.
The replacing procedure is the same as a HDD backplane.
Preliminary steps
▶
"Locating the defective server" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
RX2540 M6
Hard disk drive (HDD) / solid state disk (SSD)
176.
"Installing 2.5-inch PCIe SSD modules"
Upgrade and Maintenance Manual
"Removing a 2.5-inch PCIe SSD
136.
69.
Hardware: 15 minutes
49.
52.
136.
"Handling
69.
52.
179