Replacing A Riser Card - Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

Expansion cards and backup units
▶
"Updating expansion card firmware" on page
▶
"Resuming BitLocker functionality" on page
9.9.4

Replacing a riser card

Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Locating the defective server" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Locating the defective component" on page
▶ Remove the corresponding riser module, see
page 70.
Removing the defective riser card
▶ Remove the GPU card, see
page 307.
314
52.
"Removing a GPU card from a riser module" on
Upgrade and Maintenance Manual
95.
105.
Hardware: 5 minutes
49.
53.
56.
50.
"Removing a riser module" on
52.
RX2540 M6