Expansion cards and backup units
Preliminary steps
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
Removing the OCP dummy cover
Figure 145: Removing the OCP dummy cover
▶ Loosen the knurled screw (1).
▶ Pull the dummy cover open to release the hook on the left side (2).
▶ Remove the dummy cover (3).
CAUTION
▶
Keep the dummy cover for future use.
▶
If you remove an OCP module and do not immediately replace it
with a new one, a dummy cover must be reinstalled in the bay to
comply with applicable EMC regulations and satisfy cooling
requirements.
250
52.
Upgrade and Maintenance Manual
53.
52.
RX2540 M6