Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual page 495

▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ If applicable, remove the expansion card from slot 5 and slot 6, see
"Removing an expansion card" on page
Replacing the iRMC microSD card
▶ Remove the defective iRMC microSD card, see
microSD card" on page
CAUTION
(not valid for Europe, Middle East, India and Africa)
The iRMC microSD card contains customer information.
▶
After removing the iRMC microSD card, hand the card over to
the customer.
▶
If the customer requests disposal of the defective microSD card,
proceed as follows: Using a pair of side-cutting pliers, cut the
microSD card in half.
▶ Install the new iRMC microSD card, see
on page 491.
Concluding steps
▶ If applicable, install the expansion card in slot 5 and 6, see
expansion card" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶ Update the BIOS or iRMC S5 firmware using the iRMC S5 web interface,
see "Updating the BIOS or iRMC S5 firmware using the iRMC S5 web
interface" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
RX2540 M6
52.
493.
255.
60.
496.
69.
Upgrade and Maintenance Manual
System board and components
53.
56.
262.
"Removing the iRMC
"Installing the iRMC microSD card"
65.
"Installing an
69.
495