Looking For Mac/Wwn/Guid And Sas Addresses; Basic Information; Looking For The Mac Address Of A Lan Controller - Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

You may notice a slight performance impact during rebuild.
5.3.13

Looking for MAC/WWN/GUID and SAS addresses

5.3.13.1

Basic information

The customer needs to know the new address of the controller:
– When replacing the system board with an onboard LAN controller
– When adding or replacing a network controller
– When adding or replacing a SAS controller
Different controllers send different addresses:
– LAN controller: MAC (Media Access Control) address
– Fibre channel controller: WWN (World Wide Name) address
– Infiniband controller: GUID (Globally Unique IDentifier) address
– SAS controller: SAS (Serial Attached SCSI) address
5.3.13.2

Looking for the MAC address of a LAN controller

There are several possible locations where these addresses can be found.
▶ Inform the customer about the new or changed MAC address.
Checking the label
▶ If available, check the label on the controller. Beside the part number, you
may find the MAC address.
Using the BIOS
▶ Enter the BIOS.
▶ Select the Configuration menu.
RX2540 M6 Upgrade and Maintenance Manual
Basic software procedures
107