Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual page 486

System board and components
▶ Select the Configuration menu.
▶ Select the Security Configuration submenu.
▶ Set the TPM Support setting to Disabled.
▶ Save your changes and exit the BIOS.
For more information on how to access the BIOS and modify settings,
see the corresponding BIOS Setup Utility reference manual.
Removing the TPM
▶ Remove the system board, see
page 524.
▶ Lay the system board on a soft, antistatic surface with its component side
facing down.
Figure 342: Removing the TPM screw
486
"Removing the defective system board" on
Upgrade and Maintenance Manual RX2540 M6