Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual page 410

Accessible drives
Tools: – Phillips PH2 / (+) No. 2 screw driver (for cover 2)
– Torx Plus 6 screw driver (not valid for Japan)
– Phillips PH1 / (+) No. 1 screw driver (Japan)
Preliminary steps
▶
"Locating the defective server" on page
▶
"Removing backup and optical disk media" on page
▶
"Suspending BitLocker functionality" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
Removing the defective ODD
▶ Remove the ODD, see
page 402.
Installing the new ODD
▶ Install the ODD, see
Concluding steps
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
▶
"Resuming BitLocker functionality" on page
410
52.
"Removing the ODD (3.5-inch chassis)" on
"Installing the ODD (3.5-inch chassis)" on page
60.
65.
69.
Upgrade and Maintenance Manual
49.
90.
87.
53.
56.
105.
52.
395.
69.
RX2540 M6