Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual page 287

▶ If applicable,
"Configuring LAN teaming" on page
▶
"Suspending BitLocker functionality" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Locating the defective component" on page
▶ Remove the corresponding riser module, see
page 70.
Removing the defective expansion card
▶ Remove the expansion card, see
riser module" on page
▶ If the slot bracket on the defective expansion card is to be reused, remove it
from the expansion card, see
Installing the new expansion card
▶ If applicable, install the slot bracket, see
page 237.
▶ Install the expansion card, see
module" on page
Concluding steps
▶ Install the corresponding riser module, see
page 72.
▶
"Reassembling" on page
▶ If applicable, connect external cables to the expansion card.
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
▶
"Enabling replaced components in the BIOS" on page
RX2540 M6
"Removing the expansion card from a
284.
"Removing slot brackets" on page
"Installing the expansion card in a riser
281.
60.
69.
Upgrade and Maintenance Manual
Expansion cards and backup units
113.
87.
52.
53.
56.
50.
"Removing a riser module" on
"Installing slot brackets" on
"Installing a riser module" on
65.
239.
69.
100.
287