Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual page 211

Tools: Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Locating the defective server" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Removing the fan cage" on page
Removing the defective SAS expander board
▶ Disconnect all cables from the SAS expander board.
▶ Remove the SAS expander board, see
board" on page
Installing the new SAS expander board
▶ Install the SAS expander board, see
page 205.
▶ Connect the cables to the SAS expander board, see
Concluding steps
▶
"Installing the fan cage" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If
applicable,"Installing the front cover with lock" on page
RX2540 M6
Hard disk drive (HDD) / solid state disk (SSD)
210.
76.
60.
Upgrade and Maintenance Manual
49.
52.
53.
56.
74.
"Removing the SAS expander
"Installing the SAS expander board" on
65.
69.
52.
Figure 109.
69.
211