Replacing The Vroc Module - Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

16.8.3

Replacing the VROC module

Upgrade and Repair Unit
(URU)
Tools:
tool-less
Preliminary steps
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
Replacing the VROC module
▶ Disconnect the VROC module from the VROC connector on the system
board, see "Removing the VROC module" on page
▶ Connect the VROC module to the VROC connector on the system board,
see "Installing the VROC module" on page
Concluding steps
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
RX2540 M6
52.
60.
65.
69.
Upgrade and Maintenance Manual
System board and components
Hardware: 5 minutes
53.
56.
517.
516.
69.
52.
519