Expansion Cards In Riser Modules; Installing An Expansion Card In A Riser Module - Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

Expansion cards and backup units
▶ Insert the riser card.
▶ Fasten the riser card with two screws (see circles).
▶ Install the expansion card, see
internal RAID riser module" on page
▶ Install the internal RAID riser module, see
module" on page
Concluding steps
▶
"Installing the fan cage" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
9.8

Expansion cards in riser modules

9.8.1

Installing an expansion card in a riser module

Upgrade and Repair Unit
(URU)
Tools:
– Phillips PH2 / (+) No. 2 screw driver
– Phillips PH1 / (+) No. 1 screw driver
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
280
"Installing the expansion card into the
271.
76.
60.
69.
Upgrade and Maintenance Manual
267.
"Installing the internal RAID riser
65.
Hardware: 5 minutes
Software: 5 minutes
87.
52.
53.
69.
52.
RX2540 M6