Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual page 216

Hard disk drive (HDD) / solid state disk (SSD)
Figure 116: Connecting the cables to the rear HDD backplane (example with slimline cable)
▶ Connect the following cables to the rear HDD backplane:
1 Power cable to HDD backplane and connector "PWR9" on system
board
2 OOB cable to HDD backplane and connector "SMB3" on system
board
3 Slimline cable depending on configuration
For the cable plan, see chapter
Installing additional HDD/SSD/PCIe SSD modules
▶ Insert additional HDD/SSD modules, see
modules" on page 165
SSD modules" on page
216
"Appendix B" on page
or PCIe SSD modules, see
172.
Upgrade and Maintenance Manual
571.
"Installing 2.5-inch HDD/SSD
"Installing 2.5-inch PCIe
RX2540 M6