Installing, Mounting And Removing The 3Rw5 Hmi High Feature; Removing The 3Rw5 Hmi High Feature - Siemens SIRIUS 3RW55 Equipment Manual

Mounting and dismantling

4.4 Installing, mounting and removing the 3RW5 HMI High Feature

• Place the 3RW55 soft starter onto the 2 lower screws
• Tilt the 3RW55 soft starter up so that it is resting level against the mounting plate
tighten all 4 screws with the specified torque
Result
You have mounted the 3RW55 or 3RW55 Failsafe soft starter on a level surface and can
now connect (Page 74) it.
4.4 Installing, mounting and removing the 3RW5 HMI High Feature
4.4.1

Removing the 3RW5 HMI High Feature

Requirements
• Flat-bladed screwdriver
Procedure
NOTICE
Damage to sealing surfaces
Make sure that the sealing surfaces are not damaged by the screwdriver.
60
②
from above with the crane.
④
.
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006
③
and