Alternative Stopping; Alternative Stopping (Page 163) - Siemens SIRIUS 3RW55 Equipment Manual

Validity
This function is not available for the 3RW55 Failsafe soft starter.
Requirements
• External motor standstill detection
• Parameterize the input connected to the external motor standstill detection with the input
action "Motor standstill" (Page 194).
8.2.7

Alternative stopping

Operating principle
With the aid of a control command, you can switch from the parameterized stopping mode to
a parameterizable Alternative stopping mode. Every stopping mode can be combined with every
alternative stopping mode. The switchover to alternative stopping must take place before the
start of the planned stopping. You cannot switch to alternative stopping while stopping.
Setting via 3RW5 HMI High Feature
• Menu: "Parameters > Soft Starter > Parameter set 1 / 2 / 3 > Stopping mode settings >
Alternative stopping > Alternative stopping mode"
• Menu (Parameters): "Parameters > Soft Starter > Parameter set 1 / 2 / 3 > Stopping mode
settings > Alternative stopping"
• Access protection to the 3RW5 HMI High Feature is not active or has been reset.
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006
Functions
8.2 Run-down
163