Siemens SIRIUS 3RW55 Equipment Manual page 107

∟ Stopping mode settings
∟ Stopping mode
∟ Coasting down
∟ Voltage ramp
∟ Torque control
∟ Pump stopping mode
∟ Reversing DC braking
∟ Dynamic DC braking
∟ DC braking
∟ Stopping time 1)
∟ Stopping torque 1)
∟ Dynamic braking torque
∟ DC braking torque 1)
∟ DC braking delay 1)
∟ Sensorless motor standstill detection
∟ Alternative stopping
∟ Alternative stopping mode
∟ Coasting down
∟ Voltage ramp
∟ Torque control
∟ Pump stopping mode
∟ Reversing DC braking
∟ Dynamic DC braking
∟ DC braking
∟ Alternative stopping time
∟ Alternative stopping torque
∟ Alternative dynamic braking torque
∟ Alternative DC braking torque
∟ Alternative DC braking delay
∟ Motor protection
∟ Electronic motor overload protection
∟ Trip class
3)
∟ [...]
∟ Warning limits
∟ Remaining time for tripping
∟ Heating
∟ Response to overload thermal motor model
∟ Turn off without restart
∟ Turn off with restart
∟ Recovery time
∟ Non-volatile tripping status
∟ Yes
∟ No
Display depending on the set Stopping mode.
1)
2) Display depending on the set Alternative stopping mode.
Display of the Trip classes.
3)
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006
Soft Starter
1)
1)
2)
2)
2)
2)
2)
Parameters [3/12]
Parameter assignment
6.7 Menu of the 3RW5 HMI High Feature
Setting
Factory
x
10 s
x
CLASS 10E
0 s
0 %
x
300 s
x
Setting
Customer
107